Sheetfed offset Rapida 75 PRO

Max. sheet format	530 x 750 / 605 x 750 mm
Substrate thickness	0,04 – 0,6 mm
Max. production speed	15.000 sheets/h

Productive and economical

Production on the Rapida 75 PRO permits considerable energy savings compared to other presses. From start to finish, it implements technical solutions geared to low energy consumption.

One example is the environment-friendly VariDryBlue dryer system in the extended delivery. Two heater units warm the process air to the drying temperature preselected at the console. Optimised hot air nozzles then spread the air over the whole surface of the substrate. The still only partially saturated air from dryer modules 1 and 2 is recirculated for further use in module 3 and in the swan neck. In this way, the energy consumption for drying can be reduced by up to 50 per cent.

An optional energy management function measures the energy input at individual points of consumption and thus achieves even greater transparency.

Enlarged sheet format

The maximum sheet format on the Rapida 75 PRO is slightly larger than usual for a half-format press: 53 x 75 cm as standard, and even 60.5 x 75 cm as a special format. That also adds a little extra to the available printing area. The standard print format for straight production is 51 x 73.5 cm, and this increases to 58.5 x 73.5 cm with the special format.

In practice, the enlarged format means that printers who occasionally produce in US letter or typical magazine and catalogue formats can now plan 6-up layouts. Two extra copies on every sheet compared to other presses in this format class.

Even this small detail already boosts productivity by 50 per cent. That alone is reason to choose the Rapida 75 PRO for your B2 printing Needs.

Less space for more print

Despite the larger sheet format, the Rapida 75 PRO occupies only a minimum of floor space. Thanks to its compact design, it boasts a much smaller footprint than many other half-format sheetfed offset presses. The advantage for you: Where space in the printshop is at a premium and there is not room for other presses, it is often still possible to install a Rapida 75 PRO. And that nevertheless with adequate reserves for pile transport to and from the feeder and delivery.

The reduced footprint naturally has a further benefit, namely the positive effect on your space costs – and thus, in the end, on the cost calculations for your printed products. In other words, print production on the Rapida 75 PRO is extremely economical in every respect.